Cross Language Translation in a Web-based Environment Essay

One of the major problems with cross-language translations involving those that are rarely used together (i. e. Finish Lithuanian) is that there are no dictionaries available or it is extremely difficult to find one. The main problem is that there are not enough people to create a market and no one would invest in creation of such kind of dictionaries. English-based dictionaries, however, is of abundance. This project tackled the above cited problem in Cross Language Translation using English as its base dictionary. Artificial intelligence through Neural Networks was used as it appeared well-suited to problems of this nature. For this reason, artificial intelligence through neural networks was investigated as a potential tool to improve translation accuracy but future implementation was left as a possibility. WordNet ® was also investigated as source of defining English words and possible tool to achieve greater accuracy in cross-language translations. ACKNOWLEDGMENTS I would like to take this opportunity to thank all those who have contributed in any way, shape or form to the completion of this project report, those at Zodynai. org and the Anglia Ruskin University for their advice and support. Thanks to my friends and family who (once again) tolerated my lack of time and sometimes grumpy demeanour. More thanks to friends at Anglia Ruskin University for their ideas and criticism. Your support (directly and indirectly) is greatly appreciated. T A B L E O F C O N T E N T S ABSTRACT Acknowledgements TABLE OF CONTENTS INTRODUCTION OBJECTIVES METHODOLOGIES DESIGN AND IMPLEMENTATION RESULTS AND DISCUSSION CONCLUSION AND EVALUATION BIBILIOGRAPHY APPENDICES A Project Specification B User/Software Installation Guide A C Software Installation Guide B D Poster and Visual Presentations E Source Code F Abbreviations and Acronyms INTRODUCTION The multilingual world and the barriers it entails. A large number of people across the world converse in English thus it serves as the primary lingua franca for developments in the research world. Most publications and journals are published in such language. This leaves publications in other languages inaccessible and apparently, information in English is withheld from those millions who do not speak English (Diekema 2003) Recent trends promote the construction of a far-reaching complex infrastructure for transporting information across boundaries. Apparently, language shares a vital portion in the hindrances presented by National borders. Whilst the fact is inevitable that English remains the most spoken language in the whole world and though, it is true that the spread of ‘World English’ can promote cooperation and equity, longstanding linguistic competition threatens to be even more divisive in a globalizing world. (Maurais et al n. d. ) A lot is currently going on to overcome these linguistic barriers. The most efficient approach to overcoming such is with cross-language translation and in this literature it will well be mostly in the web-based-online-dictionary aspect of such approach. English has always been the main focus of information retrieval, well, that is by tradition. Many of them retrieval algorithms and heuristics stem from English speaking countries and thus are based on the said language. Over the years, these retrieval methods have been adopted by other language communities, creating a wide selection of language-specific monolingual retrieval systems. However, to ensure complete information exchange, information retrieval systems need to be multilingual or cross-lingual. (Diekema 2003) There are a lot of ways to pin down the hindrance of being in this multi-lingual world, the barrier of being in a world divided by being in English- or Non-English-speaking territories. And, as presented, the most researched approach is through Cross-Language translation. OBJECTIVES Main problem that we are facing when translating with English based dictionary is connecting various language data bases. One of solutions for this program is to create a base dictionary (as seen in Figure 1). Figure 1 Other major problem is that performing translation a lot of noise is created. As seen in Figure 2. Figure 2 We can examine this in greater detail in Figure 3. Word Autobusas is translated from Lithuanian language to Russian based on English language. Two different possible translations occur (bus, omnibus) when translating Lithuanian -> English. First word â€Å"bus† translated from English to Russian has three meanings â€Å"Ð °Ã ²Ã'‚Ð ¾Ã ±Ã'Æ'Ã' Ã¢â‚¬  †Ã ¾Ã ¼Ã ½Ã ¸Ã ±Ã'Æ'Ã' Ã¢â‚¬  †Ã'ˆÐ ¸Ã ½Ã °Ã¢â‚¬  word translated. As first few are synonyms third one has totally different value and meant â€Å"Topology bus†. As you can see on reverse translations †Ã'ˆÐ ¸Ã ½Ã °Ã¢â‚¬  will going to give you four different meanings translated in Lithuanian language. Figure 3 We are going to investigate WordNet and Neural networks approach for possible solution of this problem. METHODOLOGIES Cross-Language Information Retrieval, its promise. Information retrieval entails an individual querying about something of interest to him. Inevitably, since we are life forms known to be ever inquisitive, we do Information Retrieval in every aspect of our living. This event so commonly happens in a lot of situation and may be best displayed in a Library when a student picks his book of choice. Formally, let us define Information Retrieval (IR) as the process in which users with information need query a collection of documents to find those documents that satisfy his need. (Diekema 2003) In the electronic realm, the user queries by typing in related words, the system then processes these keywords to create a representation understandable by the system. In the course of the procedure, the system usually strips off non-bearing fragments of the query keywords such as articles like determiners, prepositions, and pronouns. The document collection undergoes the same process resulting to a list of document representations or a catalogue. To find documents that are similar to the query, the ‘stripped off’ query representation is then matched against the catalogue. When a certain degree of similarity between the catalogue and the ‘stripped off’ query has been established, the documents with the uppermost similarity scores (depending on the settings, say top 10) are shown to the user as results. This occurs typically during browsing through the internet and Google. comTM best displays this example. A development of IR is CLIR – the Cross-Language Information Retrieval, which, as the name implies, is information retrieval in a multi-linguistic environment. Consequently, CLIR techniques simplify searching by multilingual users and allow monolingual searchers to judge relevance based on machine translated results and/or to allocate expensive translation resources to the most promising foreign language documents. (Diekema 2003) Simple IR systems only consist of a Query, an Input Cleanser, a Matcher, the Document database and the Output, in logical order. The addition of Language Translators would make this system a Cross-Language Information Retrieval system. Of course the Document database would now contain multi-lingual entries as well and the output is to be presented in the way the query has been placed in the input. Figure 4 would show the Cross-Language Information Retrieval system in schematics. The method Cross-language Retrieval Systems promises users to state their queries in their native language and retrieve documents in all the languages supported by the system. (Diekema 2003) Artificial Intelligence and Machine Learning. Artificial intelligence (AI) results to simulation of intellectual practice such as comprehension, rationalization and learning symbolic information in context. In AI, the automation or programming of all aspects of human cognition is considered from its foundations in cognitive science through approaches to symbolic and sub-symbolic AI, natural language processing, computer vision, and evolutionary or adaptive systems. (Neumann n. d. ) AI considered being an extremely intricate domain of problems which during preliminary stages in the problem-solving phase of this nature, the problem itself may be viewed poorly. A precise picture of the problem can only be seen upon interactive and incremental refinement of course, after you have taken the initial attempt to solve the mystery. AI always comes hand in hand with machine logistics. How else could mind act appropriately but with the body. In this case, a machine takes the part of the body. In a bit, this literature will be tackling about AI implemented through Neural Network. The author deems it necessary though to tackle Machine learning and thus the succeeding paragraphs. Machine Learning is primarily concerned with designing and developing algorithms and procedures that allow machines to â€Å"learn† – either inductive or deductive, which, in general, is its two types. At this point, we will be referring to machines as computers since in the world nowadays, the latter are the most widely used for control. Hence, we now hone our definition of Machine Learning as the study of methods for programming computers to learn. Computers are applied to a wide range of tasks, and for most of these it is relatively easy for programmers to design and implement the necessary software. (Dietterich n. d. ) Machine learning techniques are grouped into different categories basing on the expected outcome. Common types include Supervised, Unsupervised, Semi-supervised or Reinforcement learning. There is also the Transduction method and the ‘Learning to learn’ scheme. A section of theoretical computer science, Computational Learning Theory is the investigation on the computation of algorithms of Machine Learning including its efficiency. Researches on Machine Learning focuses mainly on the automatic extraction of information data, through computational and statistical methods. It is very much correlated not only to theoretical computer science as well as data mining and statistics. Supervised learning is the simplest learning task. It is an algorithm to which it is ruled by a function that automatically plots inputs to expected outputs. The task of supervised learning is to construct a classifier given a set of classified training examples (Dietterich n. d. ). The main challenge for supervised learning is that of generalization that a machine is expected in approximating the conduct that a function will exhibit which maps out a connection towards a number of classes through comparison of IO samples of the said function. When many plot-vector pairs are interrelated, a decision tree is derived which aids into viewing how the machine behaves with the function it currently holds. One advantage of decision trees is that, if they are not too large, they can be interpreted by humans. This can be useful both for gaining insight into the data and also for validating the reasonableness of the learned tree (Dietterich n. d. ). In unsupervised learning, manual matching of inputs is not utilized. Though, it is most often distinguished as supervised learning and it is one with an unknown output. This makes it very hard to decide what counts as success and suggests that the central problem is to find a suitable objective function that can replace the goal of agreeing with the teacher (Hinton & Sejnowski 1999). Simple classic examples of unsupervised learning include clustering and dimensionality reduction. (Ghahramani 2004) Semi-supervised learning entails learning situations where is an ample number of labelled data as compared to the unlabelled data. These are very natural situations, especially in domains where collecting data can be cheap (i. e. the internet) but labelling can be very expensive/time consuming. Many of the approaches to this problem attempt to infer a manifold, graph structure, or tree-structure from the unlabelled data and use spread in this structure to determine how labels will generalize to new unlabelled points. (Ghahramani 2004) Transduction is comparable to supervised learning in predicting new results with training inputs and outputs, as well as, test inputs – accessible during teaching, as basis, instead of behaving in accordance to some function. All these various types of Machine-Learning techniques can be used to fully implement Artificial Intelligence for a robust Cross-Language translation. One thing though, this literature is yet to discuss the planned process of machine learning this research shall employ, and that is by Neural Networks. There is yet to be a precise definition as to what Artificial Neural Network is, though many researchers would agree that it concerns a network of austere processing elements – otherwise known as the neurons, which presents complex behaviour established by the relationship amongst processing and parametrical elements. The main inspiration that lead to the development of this technique was from the investigation of, no lesser than, our Central Nervous System and the neurons (including their axons, dendrites and synapses) which make up its most important information processing elements. A neural network model would show us that simple nodes are connected forming a network of nodes — thus, its coining as â€Å"neural network. † A Neural Network functions in 2 different manners – learning and testing. The former would literally mean, the system learns the ways it is supposed to behave while the latter is when rigorous repetition of training would eventually result to a stable system, defined by its giving of constant satisfactory outputs. Most â€Å"abstract reasoning† of an Artificial Neural Networks are being implemented through three learning types – supervised, unsupervised and the reinforced learning, as has been introduced in the preceding paragraphs. Supervised learning entails a functional relationship between the input and the output. The system has to learn every possible IO pair that can be thought of. In case, there is a miss, all that has to be done is to input the said pair into the memory of the system hence when it resurfaces, the system knows how the handle it. Hence, basically, the goal is to ‘teach’ the network to identify the given input with the desired output. (Sordo 2002) This is usually best achieved when function f has already been derived to represent the behaviour of the Neural Network system. For unsupervised learning, we feed an input and a function to the system and record what behaviour the system outputs with such input and function. To begin with the learning process, there are no IO-pairs as opposed to supervised learning. Ultimately, the main goal of achieving the stable state will be attained through rigorous repetition of test with different sets of inputs. This type of systems – imploring unsupervised learning as its method of learning, are best displayed in statistical modelling, and the likes. Reinforcement learning stems its roots from the related psychological theory that has been conceived even before AI has been. Dynamically, in this type of learning, the machine interacts with its environment by producing actions a1, a2, †¦ These actions affect the state of the environment, which in turn results in the machine receiving some scalar rewards (or punishments) r1, r2, †¦ The goal of the machine is to learn to act in a way that maximizes the future rewards it receives (or minimises the punishments) over its lifetime. Reinforcement learning is closely related to the fields of decision theory (in statistics and management science), and control theory (in engineering). The fundamental problems studied in these fields are often formally equivalent, and the solutions are the same, although different aspects of problem and solution are usually emphasised. (Ghahramani 2004) Advantages of investing a system through Neural Networks. Neural networks with always have the outstanding characteristic of deriving intelligence from the usually complicated and, oftentimes, fuzzy data stored in the neurons. These systems, oftentimes, offer to be easy utilities to deduce patterns and perceive trends that are difficult to be noticed by either human observation or by our current computer intelligence. A trained neural network is regarded as an â€Å"expert† in the category of information it has been given to analyze. This expert can then be used to provide projections given new situations of interest and answer â€Å"what if† questions. (Chung et al 2007) It is used for adaptive learning on how to handle tasks based on the input provided for training or preliminary experience. It is a self-organizational tool that hones its own picture of the data it receives in as early as learning time. Neural networks another feature is that it is a real-time operation system where all calculation may be performed in parallel. Fault Tolerance via Redundant Information Coding is another aspect of the neural system where partial destruction of a network leads to the corresponding degradation of performance. However, some network capabilities may be retained even with major network damage. The platform to a successful implementation. Several environments can be used in totally implementing a Cross-Language Translator through with the various and fast developments in computer technology since its introduction. In the succeeding paragraphs we will be tackling some of those that has come the author’s A-list. Microsoft . NET Framework. This framework form part of Microsoft Windows operating systems, containing a vast number of pre-coded resolutions to general program requirements, and governing the performance of programs written particularly for the framework. This framework is a vital Microsoft contribution and is projected on being utilized by most applications created and to be created for Windows platform. Pre-coded solutions outlining the framework’s Base Class Library (third layer from Operating System in the . NET Framework) encompass a wide range of software requirements in areas including: cross language translation, user interface, database connectivity, cryptography, data access, web application growth, network communications, and numeric algorithms. This layer contains classes, value types, and interfaces that you will use often in your development process. Most notably within the . NET Framework Base Classes is ADO. NET, which provides access to and management of data. Supervising the software’s runtime requirements, this software is written for the . NET Framework implemented in an environment. This runtime environment, which is also a part of the . NET Framework, is known as the Common Language Runtime (CLR). The CLR provides the appearance of an application virtual machine, so that programmers need not consider the capabilities of the particular CPU that will implement the program. The CLR also provides other significant services such as security mechanisms, memory management, and exception handling. The class library and the CLR together compose the . NET Framework. The . NET Framework is included with Windows Server 2003, Windows Server 2008 and Windows Vista, and can be installed on some older versions of Windows. .NET Framework 1. 1 This is the first major . NET Framework upgrade that is accessible on its own as a redistributable package or in a software development kit since its publishing on April 3, 2003. It forms part of the second release of Microsoft Visual Studio . NET – the Visual Studio . NET 2003, and is the first version of the . NET Framework to be included as part of the Windows operating system, shipping with Windows Server 2003. 7 .NET Framework 3. 5 This version was authoritatively released to manufacturing (RTM) on November 19, 2007. As with . NET Framework 3. 0, this version applies the CLR of version 2. 0. It also installs . NET Framework 2. 0 SP1 adding some methods and properties to the BCL classes in version 2. 0 which are vital for version 3. 5 features such as Language Integrated Query (LINQ). These changes, however, do not involve applications written for version 2. 0 and a separately, new . NET Compact Framework 3. 5 was released in hand-in-hand with this revision to give support for additional features on Windows Mobile and Windows Embedded CE devices. The source code of the Base Class Library in this version has been partially released under Microsoft Reference License. 7 .NET Framework 3. 5 builds incrementally on the new features added in . NET Framework 3. 0 – for example, feature sets in Windows Workflow Foundation (WWF), Windows Communication Foundation (WCF), Windows Presentation Foundation (WPF) and Windows CardSpace. This version also consists of a number of new features in several technology areas which have been added as new assemblies to avoid breaking changes. They are: (a) deep integration of Language Integrated Query (LINQ) and data awareness which will let to write code written in LINQ-enabled languages to filter, enumerate, and produce projections of several types of SQL data, collections, XML, and datasets by means of the same syntax; (b) ASP. NET AJAX 3. 5 lets you craft more resourceful, more interactive and highly-personalized Web experiences that work transversely with almost all the most popular browsers; (c) The New Web protocol sustain for building WCF services adding AJAX, JSON, REST, POX, RSS, ATOM, and several new WS-* standards; (d) Full tooling support in Visual Studio 2008 for WF, WCF, and WPF, including the new workflow-enabled services technology; and, (e) New classes in . NET Framework 3. 5 base class library (BCL) that address many common customer requests. Visual Studio 2008 and the . NET Framework 3. 5. The Microsoft Visual Studio development system is an appropriate development instrument devised to aid developers to tackle complex problems, thus create inventive resolutions. This system’s role is to improve the development process; hence, achieving breakthroughs would be easier and more satisfying. Using the Microsoft Visual Studio Development system will be very productive for this project since it would continually deliver better ways for cross language translations with less energy and with ease from other software. It has efficient form of code editors, IntelliSense, Wizards, and multiple coding languages in one integrated development environment (IDE) to high-tech applications in life- cycle management. New versions of Visual Studio keep bringing innovative tools to help developers focus on solving problems without wasting time. With this development system, software developers gain from an integrated product experience that spans tools, servers, and services. Visual Studio products work well together with other Microsoft software, such as Microsoft server products and the Microsoft Office system. Visual Studio offers a comprehensive choice of tools for all phases of software development, testing, deployment, integration, and management. Every kind of software developer, from novice to skilled professional, can use the Visual Studio because it is engineered to support the development across all types of devices such as PCs, servers, the Web, and mobile devices. Visual Studio is the most reliable tool that is engineered and tested to be always dependable, secure, interoperable, and compatible. Visual Studio offers an unparalleled combination of security features, scalability, and interoperability. Although Visual Studio always incorporates forward- thinking features, it is designed to ensure backward-compatibility everywhere possible. Being a set of technology capabilities, core products, and best practice guidance, the Microsoft Application Platform (MAP) focuses on aiding IT and development business partners to maximize opportunity. As one of its core products, Visual Studio has always and continues to help spearhead for the right customer links, business efficiencies, and value-added services through provision of a fully integrated and single development environment for all types of advances, including Microsoft Windows, Microsoft Office, Web, and mobile applications.

Framing Carpentry

Have you ever built anything with your hands? Maybe a birdhouse? What about a model car or plane? We’ve all built a gingerbread house before; haven’t we? Well, no matter who we are, or where we come from, most of us have built, or helped to build, something with our bare hands. The satisfaction a person gets from completing something with their bare hands is an amazing feeling. Now, have you ever built a house before? Yes, I mean an entire house. Starting from what is basically a pile of sticks. Most people haven’t. Being a framing can give a person satisfaction that is not easily found. But this is not a job for the weak. Being a carpenter may be one of the hardest and most dangerous jobs a person can do on a daily basis. Framing is a job that anybody should be proud to do. Not only does is take a great amount of physical and mental strength, but it takes an artist’s touch as well. Whether you rent a home, or own your own, somebody put their blood, sweat, and/or tears into building the place you call home. Blood may not be as common as sweat, and tears even less so, but with the amount of physical energy that it takes to build a home, yours took at least one of them; more likely two. I’ve been working as a framing carpenter for a quarter of my life, so I hope you take my word when I say it can be flat out exhausting. An August day spent at the lake can drain a man. That same August day on top of a roof can reach 130+ degrees, and will push even the fittest men to their physical limits. People might say, â€Å"I hit the gym every night, I could handle it. † Okay, put on a tool belt and give it a shot. But remember, that tool belt weighs about ten pounds. Now factor in repeatedly, and I mean hundreds of times a day, lifting anywhere from two to one hundred and twenty pounds; and don’t forget the heat. I’ve personally seen this drain a man’s energy so much that in just one moment of exhaustion, he buried a saw (mind you a power saw) in his left thigh almost four inches deep. There was blood and tears, and for a moment I feared for his life. Of course this isn’t as common as a shooting yourself with a nail gun, slicing yourself on a strap, or stepping on a nail, but it happens. These lapses in judgment happen on some small scale everyday so you must always be mentally aware. There is so much more to building a house than being able to work hard. As much, and sometimes more energy can be spent on the mental process that takes place. I asked you earlier if you’d ever built a house from a pile of sticks. Essentially, that is what takes place. Imagine your house being sent out on the back of a truck. And it’s not like a Lego house that is ready to put together. Critical steps must be taken from the moment you set that first nail. A mistake in that took five seconds to make could take days to fix. I know a guy who built a 5,000 square foot building too tall. I know a guy who built every window in the house six inches to small. I know a guy that cut over 5,000 dollars worth of logs the wrong length. Sure these were stupid and costly mistakes, but if you can show me one person that hasn’t made a dumb mistake at work, I can show you a thousand who have. Being physically exhausted keeps your thought processes from working properly. Your body will take care of its physical needs first, and if you don’t have enough left it will shut down mentally. I believe this has happened to most of us at some point; studying perhaps? Keeping your mind fresh is most crucial when you get to the roof. Making four different roof lines come together harmoniously can be very difficult. Calculating multiple angles for each roof to blend perfectly can be a headache for even math majors. But when all is said and done, you can look back at your own little masterpiece with pride. Can you really consider framing a house†¦.. a masterpiece? Absolutely! Here in St George, UT we have an annual event known as the Parade of Homes. This is where local construction companies show of the skills of their trades, and what I believe you could call their artists touch. Many of us attend this annual event, and gawp at the beauty within these homes. We look at the intrinsic details of a fireplace or ceiling, but do not take much time to think about the work it took to build these. It once took me a day and a half to build fireplace; with a helper. The details were absurd. It was something that should have been built with foam, not wood. Six different radiuses, some of which had moon sliced openings with waves protruding on every surface, and a light bar that followed the last one. Now, did I feel like an artist upon completion? You better believe I did; I felt like Picasso. It wasn’t easy to build this with a power saw and nail gun from only a pile of sticks. But it is precisely these types of projects that leave me with an overwhelming sense of pride. After all of the houses I’ve built I still take pride in my work. It feels good to drive through a neighborhood, and to remember each house I’ve built. There are memories that come to mind with every house. I can picture the first house that I built as a grunt, as well as the first I built as a foreman. I remember how good my first house as a foreman felt, and how I sat in my truck when we were finished, and felt the pride of doing it my way. It’s always a good feeling to accomplish something that you take pride in, and everybody needs that feeling. Whether it was a million dollar home, or a track home that took three days, it’s always felt good to finish a home and admire it. It’s great to know that it was through my knowledge, skills, and strength that I took a pile of sticks, and built a house. This is why I think framing is a job to be proud of.

Strategic management Essay Example | Topics and Well Written Essays - 2000 words - 5

Strategic management - Essay Example The beef rearing system is characterised by small farmers who mainly keep less that 10 beef cattle. Kapak should increase the number of retailers and expand own distribution network through Agra trading in order to reduce the bargaining power of the retailers. The company should also segment the market and build strategic partnerships with the farmers. The company can start beef cattle rearing in order to ensure a constant supply high quality beef cattle. In addition, Kapak must enter the emerging markets such as Middle East and South America in order to minimise competition in the saturated domestic and EU market. Table of contents page number 1.0. Introduction†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦4 2.0. Business environment †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.4 2.1. Pestle analysisâ₠¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.4 2.1.1. Political environment†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..4 2.1.2. Economic environment †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..4 2.1.3. Social environment †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦5 2.1.4. Technological environment †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦5 2.1.5. Legal environment†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦...5 2.1.6. ... Kapak’s Value chain†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦7 6.1. Beef cattle maturation†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.7 6.2. Processing†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.. 7 6.3. Distribution and marketing †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦7 6.4. Customer base†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦8 7.0. Strategy appraisal and recommendations†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 8 8.0. Conclusion †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ 9 9.0. Bibliography †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ . 10 Introduction Kepak history dates back mid-1960s when Noel Keating established a retailer butcher’s business. Keating continued supplying wholesale beef to the food service sector in to the larger market. The retailer was selling beef under the EU’s Common Agricultural Policy and utilized export credit refunds for large supplies to Middle East and North Africa. The company currently operates nine manufacturing units in Ireland and UK and has employed more than 1,700 employees. In 2010, the company netted about US $ 1 billion in revenues and principal revenue generating activities were animal slaughter and sell of processed meat through the meat division (Bell, McLoughlin and Shelman, 2011, p. 4). The paper will discuss the business env ironment of Kapak, the current strategy, the value chain, and provide strategic recommendations for long-term success and profitability of Kapak. Business environment PESTLE Analysis Political environment The manager of Kepak Convenience Foods has often cited food safety as a major political concern. A major food and mouth

Paul Garrett Essay Example | Topics and Well Written Essays - 750 words

Paul Garrett - Essay Example and the economic devastation caused by the world wars set the industrial giants thinking and they felt the necessity to prove to the consumers that their existence is no threat to democracy and the American dreams. â€Å"In 1923, General Motors, although eager to have its employees ‘look upon our organization as a human rather than a corporate institution,’ had to recognize that it is one of the limitations of a large organization that the men charged with guiding its destiny cannot maintain a direct personal contact with all of its employees.†(Marchand, p.8) Industrial magnets began to ponder as to how to rejuvenate the plights of their soulless corporations. The top ones strongly felt that something was lacking somewhere. There was no bridge between the top management and the employees on the one hand and the consumers on the other, and if there was one, it had big gaps and lacked continuity. â€Å"Reports of an apparent dwindling of employee morale, sometimes voiced by corporate leaders themselves, revealed lack of individual vitality within these large-scale operations, an absence of a recognized, animating people.†(Marchand, p.8) â€Å"PAUL GARRETT in 1931 became the first person to direct public relations at General Motors. During his 25 years at GM, he emphasized quality performance, public interest, and honesty as corporate public relations principles. His effectiveness inspired other corporations to establish public relations departments.† (Public†¦.)The process of soul search in the organizations began. Perhaps, Paul Garrett was born for the cause of public relations. He was quick to act and soon realized the tremendous potential of this exercise in the cause of the betterment of the organization on all fronts. â€Å"By the end of 1931, Garnett reported, the company was receiving more than five thousand letters of appreciation a week. He distributed multiple anthologies of â€Å"typical excerpt† from these letters to a long list of

Food Van Business Plan Case Study Example | Topics and Well Written Essays - 500 words

Food Van Business Plan - Case Study Example Our master-chef team will oversee the whole process and ensure that the health regulations have adhered. Our foods will improve the well-being of our customers and hence our food will be prepared to have that in mind (Myrick 2012, p.23). Our grilled chicken is prepared in a convenient way using fresh ingredients. Each serving involves a sensational taste that is appealing to the customers. Our fish and veggies are pre-blanched and hygienically prepared and sealed in a way that is appealing to the customers. The veggies are being chopped and packed freshly to ensure that their natural tastes are maintained. All ordering, stocking and quality controls are managed by on an in-house computer-based system enabling usage patterns to be monitored maintaining ordering efficiency and minimizing wastage. Our customers can have their orders delivered at their destination within the campus. The business is a profit-making organization will aim at ensuring that the production cost is lower than the sales. At the beginning of each day, the van will arrive at the support kitchen where the foods will be loaded with the day’s meals. This will ensure that the supply of ordered food is constant and no inconveniences are experienced. Promotion of our products will be at offering gifts and subsiding prices on particular days. These efforts will maintain customer loyalty and ensure that customers have trust in the kinds of foods we offer.  

Organization Development Research Paper Example | Topics and Well Written Essays - 4250 words

Organization Development - Research Paper Example Effective solutions can be brought about through proper discussion mechanisms incorporated in such open discussion forums. Such organizational development frameworks must be effectively designed by the organizational managers to help in the development of the organizational people as a whole and not divided by class or groups (Murphy and Willmott, 2010, p.469). Similarly the organizational managers need to identify different stakeholders when issues of organizational diversity are to be discussed in the open forums held in the business organization. Herein the different stakeholders to the issue are to be identified based on diverse groups depending on parameters like race, gender, cultural variances, sexually oriented groups or also suffering from permanent or temporary disability and other old age organizational people. The issues relating to these diverse groups need to be discussed openly to help arrive at potent solutions. Similarly organizations embracing people along different nationalities also need to devise methods to help cover the linguistic barriers so as to help the regional people understand the organizational objectives effectively (Cummings and Worley, 2008, p.280). The paper in this connection endeavors to highlight on such organizational development models that would help address the issues emerging from incorporating diverse individuals or groups in the concern. It would present a thesis on the literatures pertaining to the same and reflect on some practical situations pertaining to business organizations incorporating diverse groups and mode of solving their problems. Literature Review Jones and Brazel (2006) identify a multicultural organization as that which incorporates a large amount of diversity in both its... This essay stresses that the organizations need to work along the social sphere to design several community programs to promote the development of the different regional and other underrepresented people in the concern. Organizational managers need to design several benefit programs focused on such regional and diverse minorities to help in their development and promotion in the concern. The business development managers need to design organizational development models to help the people thrive in an open atmosphere free from coercion and individual or group autonomy. In fact the organization should let the people perform in an environment filled with positive competition and thereby gain promotion based on performance and not undue influence. This paper makes a conclusion that organizations in order to thrive in the new millennium must focus on incorporating diversity both pertaining to the workplace and also in regards to the consumers. Incorporating people from diverse areas tends to reflect that such people can either belong to different racial and ethnic tribes or are disabled or also can be classified based on differences of gender, age and or religious backgrounds. The organizations tending to incorporate such people from diverse groups need to design their policies accordingly to help in the growth of the people both along their professional and personal lifestyles with that of the organization as a whole.

Housing in a Free Market Economy Essay Example | Topics and Well Written Essays - 3000 words

Housing in a Free Market Economy - Essay Example With the end of the housing blast of the past decade, the UK government under Gordon Brown wants to energise the housing sector of the economy. The government’s interference in housing and its authenticity in playing a role in the housing market through its policy initiatives is being seen doubtfully by experts as they perceive the ups and downs of the market functioning a part of the business cycle of regular intervals of boom and bust OR the government’s desire to meddle in the housing affairs just shows the obsession of the people to own a home of their own OR the government has started realising the importance of hosing market in the overall economy of the country, needs o be analysed (The Telegraph, 5 June 2008). The government can intervene in housing sector by planning its role through various choices and taking certain measures. It can initiate a national homes saving scheme by facilitating first-time home buyers to use their tax-free 5-years period deposits. It can allow parental help by making the contribution in the housing of their children tax-free. It can increase the stamp duty to a certain limit to minimise the impact to new buyers. The government can declare a stamp duty ‘holiday’ for a stipulated time to boost the housing market. It can loosen the regulatory grip so that home building activity becomes hyper. It can be lax in insisting on Home Information Packs, which are offered and paid by the sellers. The government can limit the number of ‘affordable homes’ on the upcoming housing locations to boost housing growth as house making is less profitable for making affordable homes (The Telegraph, 5 June 2008). Competition is very important in housing market to disrupt the rent-seeking tendencies by powerful builders. Rent seeking, laissez-faire and state intervention not only kills competition between the market forces but comes in the way of innovation. Government level intervention can bring about greate r transparency in the housing transactions (Hooper, 2009). Arguments in Favour of Government Intervention in Housing Sloman and Sutcliffe (2004) state a number of reasons inviting government intervention in business. To fulfil the aim of social efficiency, which is attained when marginal benefits become equal to marginal costs from production or consumption activity, government can interfere in the specific business market. Response of market to changes in supply and demand may be slow, which can impair the level of equilibrium and cause instability. A free market does not consider the needs of less-affordable people and therefore, the production of merit goods could be insufficient. Market irregularities can be corrected through taxes and subsidies. Taxes can be increased to equal the size of the marginal external cost and offering subsidy equal to the marginal external advantage. The government can regulate the market behaviour by making certain laws to be abided by for the benefi t of common man. These are some of the steps government can take to interfere in the market for any business activity. The current discussion on government role in housing market has gained momentum because of the global financial crisis, which has drawn the attention of policy makers in the UK government. It wants to rescue the housing and banking sector, as housing and finance are inter-related sectors; without getting loans sanctioned by the financial organisations, the home buyers cannot purchase houses and the housing industry cannot attain growth. On its part, the British government through the Bank of England made $352 billion available via the Special Liquidity Scheme to enhance the

Research and Application Business Paper Example | Topics and Well Written Essays - 750 words

And Application Business - Research Paper Example This Strategy emphatically promises to increase business and maintain a competitive edge in its own segment for JetBlue. The Customer Value Proposition of JetBlue: The marketing strategy and its success so far suggests, JetBlue has relied heavily on Operational excellence as the thrust area of its Customer Value Proposition. The success of the airline so far has been attributed by its focus on an array of operational goals like maintaining a high level of customer service with low costs and stimulating demand with low fares. They strive to maintain a sustained growth pattern by increasing frequency on their existing routes. The results have shown that such initiatives have been well received by the market and the customers have responded well to these efforts. This is further accentuated by feats like attainment of highest completion factor, the highest on time performance and the lowest incidence of mishandled bags. These achievements reflect a high level of operational and manageme nt excellence. They obviously enhance the customer experience and perception and augur well for the business. The airline strives to achieve competitive advantage through customer intimacy in certain areas, For example, the high level of customer service measures like maintaining transparency in operations contribute to the value proposition. However, it does not succeed in attaining customer intimacy, though it does succeed in achieving customer loyalty to an extent. It also makes effort to achieve product leadership. However, the efforts in the direction like increasing Live TV channels from 24 to 36; new aircraft and leather seats are not the source of competitive advantage, though they do mean product differentiation to an extent. b) Business risks: The 10 K/A of JetBlue report an array of risks that could harm the business to some extent or the other. However, amongst them the risks that could really affect profits to an extent wherein the ability of the airline to meet the sto ckholders’ expectations could be threatened are as mentioned hereunder. The basis of differentiation of these risks from the remaining set of risks is the extreme nature of consequences that they may have on the profits of the company in a relatively short span of time. Besides, once incurred, the said risks will require considerable effort and resources to contain and control. Last but not the least, the risks mentioned here are the ones specific to Jet blue and not the ones facing the Airline industry in general, since the general risks are usually responded to better with the industry and Government help. In addition, the stockholders understand and are already more aware of such risks and thus the expectations of the stockholders regarding these risks can be better managed. As such, these risks are more imminent in nature. The critical Risks: a. If JetBlue fails to implement their growth strategy, the business is at a great risk. The growth strategy is aimed at increasing the number of flights in underserved and overpriced areas. The aim is to maintain high quality customer services with low fares and generate more demand. The Low fares are to be compensated for with a high level of operational excellence. This will considerably make up for the low fares and bring costs down while maintaining the rate of bookings at the same time. This means a high profit margin

Construction Technology and Innovation Essay Example | Topics and Well Written Essays - 1000 words - 2

Construction Technology and Innovation - Essay Example More of this advancement has been geared too towards the conservation of the environment (FLICHY 2007, pg19). There are various building forms in the UK which are mostly dependent on their respective uses. The various designs of the building forms are done taking into account their occupancy and the use to which they are subjected (FLICHY 2007, pg37). Such forms include; residential buildings mostly permanent houses and/or low-rise buildings constructed with a view to provide housing; Institutional buildings constructed for various institutional purposes (these could include larger engineering buildings, high rise buildings); and Industrial buildings and commercial buildings. The building construction methods should conform to the various standard and codes provided for their regulation. This should undergo careful planning so as to avoid possible wastes and to ensure that they are secure and safe. In addition, the materials used for construction should be carefully evaluated to avoid constructing bulky houses with poor architectural outlooks (AKINTOYE, GOULDING & ZAWDIE 2012, pg36). Most of these materials should be considered to relation to their costs, structural soundness and their availability. As a general rule in most civil and building constructions, the availability of materials would to a large extent dictate the construction materials to be utilized for the constructions. In the UK, the various construction methods available have been utilized with a view of reducing the time for construction and costs. In addition, the construction methods help in improving the quality of buildings produced i.e. relating to the types of finishes required. The in situ construction of buildings has been used for decades and provided the most conventional building procedures (AKINTOYE, GOULDING & ZAWDIE 2012, pg56). Construction is done on

Undergraduate research program Essay Example for Free

Undergraduate research program Essay University of Delaware is one of the leading undergraduate research universities in the country. Many students are currently enjoying the benefit of these services that the university offers. The Program Aims The university is determined to bring out the best out of their students by given them the chance of being in the forefront in the knowledge and creative works, this they achieved by making the undergraduate and even the new students work as an assistance or a junior member of their faculty research team preparing them for the research future and making them to have the opportunity to review the professional researcher’s works so as to expose them to the act of gathering ,evaluating and sharing results with the scientific, artistic or scholarly community. Participants and Eligibility The research program is open to all interested undergraduate. Student who wants to develop themselves in the area of research sometimes some exceptional students are given salaries or stipend during summer, stipends are given. The only requirement is to have a cumulative grade point index of at least 3. 00 to ascertain the level of seriousness to academics so that it would not affect the academics performance of the students Functions of the program The program provides the students with the general information about the research experiences The way to approach the faculty researcher that the students might want to work with Assistance to undergraduates that are writing their projects for the Honours Degree to make distinction in such projects Means of funding the research work through faculty sponsors and scholarships Provision of research reading room in which have the archives of the past senior research works are placed so as to make references to them Many opportunities for students to presents and show case their research papers. Reference University of Delaware (2007): http://urp. udel. edu/basics/policies. aspx. Retrieval date; 12th May, 2008.

Disadvantages Of Moving To A Paperless Office

Disadvantages Of Moving To A Paperless Office The growth in the economy of a country immediately raises the demands for several products to make business work. These demands will in turn influence the growing production and increased output which requires additional energy to run the production machines. Both issues, while common in business, have potential to cause long-term problems; especially when dealing with environmental issues. In product development for instance, corporations are driven to develop and produce new products that comply with environmental requirements like environmentally-safe packaging and fuel-efficient vehicles using hybrid technology. These issues highlight that the future of business is so challenging that innovation becomes the key focus to win business. The development of technology spawns new trends in our business environment. One of the emerging technologies in the information era is a paperless office that benefits from the digitalization of documents. Most of these trends, like any other, possess both advantages and disadvantages. Paperless Office In this paper I am discussing the popular concept of a paperless office. However, the discussion will focus on its issues and disadvantage rather than its benefits. History of Paperless Office In the 1970s there were predictions regarding an office which doesnt require any use of paper. One of those predictions can be viewed in an edition of Business Week in 1975 (The Office of the Future, 1975). It was a dream of an office in 1975 that, in the future, paper would be obsolete. According to some predictions, offices would not require any paper because everything was processed and stored digitally through various technologies. The predictions stemmed from the birth of Personal Computers (Selen, 2001). In reality however, these predictions are still the stuff of cinema. A paperless office as predicted above has never been fully implemented. On the contrary, for most offices today, the presence of the personal computer has not radically reduced using papers as output. People have been swayed away with the easiness of writing or drawing within a personal computer only to then print them on a piece of paper; forgetting the dreams that were present before. Current Expectations Regarding Paperless Office Today, when the need for efficiency has been called for, we return to the hope of a paperless office. The concept has been slightly modified however in the realization that paper has been a part of our daily lives and that the use of personal computers in the 1990s has produced the need for more paper. The concept of Paperless Office is now a philosophy; one of working with minimal paper, using processes that eliminate the use of paper, and to make documentation in digital form whenever possible. The main focus is no longer on how much paper is used, but on the efficiency that is gained from the process towards a Paperless Office (McIndoo, 2009). Processes of Paperless office There are two methods of transforming a company into paperless office. The first is by automating the processes that generally use paper as an essential tool. Technologies that exist in facilitating that process are: Enterprise Data Automation Software. Software used to integrate forms and data with systems that processes them. Form Technology. Software used to design various types of forms. Using forms is no longer necessary if people performing business transactions have personal computers with form technology in it. Databases. Device to replace the function of a filing cabinet. Data is made into digital form and then stored in a database with sufficient security technology in it. Digital Signature. Software allows evidence of signature in digital form. Papers are generally used as business evidences. This is required in business transactions to generate legal binding between two or more parties. Workflow Platforms. Process flow of an office. Paper documents are generally used to transfer a data to other departments so that it can continue doing what is needed next. This flow of work can now be documented and transferred in digital form, using the workflow platforms. The second method of pursuing the paperless office is data storage transformation. In a general office, the data is conventionally stored and protected in a filing cabinet or in warehouses. This generally ends up creating piles of useless scrap paper rather than useful files. Using the Paperless Office technology, all this data can be transformed to a digital form very easily. Some of the tools available to support this process are scanners, book copiers, photo scanners, microfiche scanners, negative scanners, fax to PDF converter, and document management systems. (The Economist, 2008). Issues in Implementing Paperless Office Despite the benefits that are offered by the presence of the concept, the paperless office also generates several problems in implementation that have not yet been overcome. In order to make ease of our understanding, these issues will be divided into the two methods below. Issues in Digitizing the Work-Flow In digitizing the office processes, issues that arise include: Difficulty in Submitting and Signing Digital Documents. It is foreseeable that we can process documents digitally with sufficient practicality. Nevertheless, it is still difficult to image a digital station that can be transferred to our clients desks, so that he/she can sign it. This process is made more complicated if we are to think about the legal implications of digital work processing. It is still a huge question whether digital signature can be used as legal evidence or not. End-user Adoption of the New Processes is Difficult. The issue of getting all divisions of a group of large companies on board regarding the digital processing system can be complex. The system concept may be accepted easier by high ranking officers. However, for end users and executors, the concept of digital work processing might be difficult to adopt. Additional planning and modifications become essential. Changing from the Legacy Processes Can be Problematic. An issue that arises in terms of transforming paper-based processes into digital processes is with dealing with parties that have not adopted the digital processing method. As the world has globalized, we are to think about how to serve and deal with practically all people in the world. Expecting all of them to accept and apply the digital processing system now is practically wishful thinking (Gladwell, 2005). Cost Saving Justifications are Sometimes Not Fulfilled. Another important issue to consider is whether the digital processing system can all be financially justified or not. The basic purpose of digitizing most of the working process is to get significant cost savings out of it. It might work on a smaller scale in areas that we have initially chosen. The question is, whether it will remain cost beneficial when it is implemented in a wider scale or in all areas without exceptions. Issues in Transferring Existing Documents into Digital Form Despite the pros and cons in practicing the paperless office, there are several requirements to take into account when making all documents digital. The issues are as follows: Legal Ramifications. The legal and governmental aspects of a technological development often grow very slowly compared to the technology itself. This should also be rationally expected in a paperless office. Will digital contracts be as lawfully binding as paper agreements? Can document manipulation be considered a heavy violation against the law? Questions like these need to be pondered over by the business society. The Target Reader. Even today, forming a financial report requires a sufficient consideration of the target readers ability to understand the report. The same applies to digital documents. Will the reader accept the new way of doing business or are they more likely to feel comfortable with the old ones? The readers ability to adapt is an important factor for consideration. Changed Longevity of the Documents. This is a similar consideration to our paper-based documentation. Will the technology exist to maintain the longevity of digital documents, at least 5 years into its future? 10 years? 20 years? This is necessary to abide with the rules of business and accounting (Walker, 2009). Companies Going Green. Some companies still perceive that the idea of being green companies is merely to comply with government regulation that forces them to do so. But, in fact, it provides the company with strategic opportunity to take benefits of the consumers increasing awareness of using green products. Since being green companies right now has become part of a corporations marketing strategy, it is now common that they start using traditional performance evaluation measures such as return on investment (ROI), net present value (NPV), market share, and other factors to assess their go green initiatives. In general, the driving forces of going green concept are the result of two forces: external or internal pressures. The Transfer Process. Figure 1 shows that by relying on paperwork, we spend a great deal of time on the process and also waste many sources. Figure 1 Paperless Office Schematic Process Conclusion In hindsight we can now conclude, the concept of a paperless office may not be even feasible. However with growing demands, the need to reduce our dependency on paper and its inefficient storage constraints can be analyzed to meet the growing demands of business. The main focus is no longer on moving to a completely paperless process but to a more efficient, cost effective, and environmentally friendly paper reduction process. Many factors need to be taken into consideration during the economical growth cycle of a business and the people who support that growth. Word processors, scanners, software advancement, algorithms, hardware developments, etc. continue to improve the ability of businesses to be able to plan and implement the digitalization of accessible documents. Combined strategies help move the business forward by reducing paper reliance and improving efficiencies of data access while still maintaining security measures. Cost, ease of use, and legal issues continue to be a driving factor in determining when processes can be digitized. Transforming a business to a digitized process can be difficult and complex. Cost, timing, and longevity of the process need to be analyzed to determine if digitization is even a feasible concept for a particular process. State and federal regulations need also to be considered. Despite the benefits offered by the concept of a paperless office, several problems in implementation have not yet been overcome. Digitalization may work on smaller scales and may never be able to materialize on a wider scale. Cost and ease of use for all people continues to be the driving factor in preventing a paperless system in all areas without exception. There will always be issues and disadvantages of moving to a paperless office. The key focus is to define all the issues and disadvantages of moving to a reduced paper office along with the advantages and timeline constraints.

The Marxist Hamlet Essay -- Essays on Shakespeare Hamlet

The Marxist Hamlet In his article "'Funeral Bak'd Meats:'   Carnival and the Carnivalesque in Hamlet," Michael D. Bristol mingles Marxism and Bakhtin's notion of double discoursed textuality into an unique reading of Shakespeare's drama as a struggle between opposing economic classes.   Bristol opens with a two paragraph preface on Marxism, highlighting Marx's own abnegation of Marxism:   "Marx is famous for the paradoxical claim that he was not a Marxist" (Bristol 348).   While he acknowledges some of the flaws inherent in Marxist criticism, Bristol uses the introductory paragraphs to assert the "enormous importance" of "the theory of class consciousness and class struggle" which Marxist theory includes (349).   Having prepared readers for a discourse whose foundation lies upon "the most fundamental idea in Marxism," Bristol recasts Hamlet as a class struggle.   Ã‚  Ã‚  Ã‚   A strange, mutli-faceted mingling pervades Bristol's argument, and, according to his thesis the drama of Hamlet as well.   According to Bristol, two contrasting texts, two opposing social worlds, flow past one another in the drama, forming a strange suspension "of grief and of festive laughter" (350).   This odd juxtaposition of opposites becomes the basis for Bristol's introduction of the carnivalesque.   The echoes of Carnival within Hamlet, according to Bristol, ceaselessly evolve throughout the play until they reach their most perfect representation in the grave-diggers' scene of the fifth act.   Bristol assigns Carnival a function that immensely strengthens his thesis:   "Carnival opens up alternative possibilities for action and helps to facilitate creativity in the social sphere" (351).   Bristol's discussion of Carnival expands in order to include the theories ... ...istol concludes his article by explaining the ultimate end of the Carnivalesque, "the dissolution, and finally the extinction of identity, the annihilation of the individual in the historical continuum" (365).   The bodies of the festival-makers, the court of Hamlet, lie on the stage like "slaughtered 'meat'" (364).   Bristol concludes that the second culture, or the second language, of Carnival within the drama of Hamlet, supplies an alternate reading for the drama by "uncrowning the shifting rationales used to explicate political intrigue," by transforming the play into a struggle between social classes as expressed by the carnivalesque (365).   The doubleness of Hamlet, the mingling of tragedy and the comic, sheds new light on the drama as an ambivalent and grotesque Carnival which diametrically contrasts the power and propriety typically associated with the play.

Iagos Justice :: essays papers

Iagos Justice In William Shakespeare’s play Othello, there lurks an evil that far is surpasses the darkness of the devil, it lies in the antagonist Iago. Othello who passes Iago up for a promotion simply because Iago is not a arithmetician, swears to take his revenge and destroy the moor and every thing Othello holds dear. Through this Iago plays judge, jury, and executioner, but is Iago’s justice justified or does his justice go far beyond the point of justice that he crosses the line. Once that line is crossed there is a point of no return. All barriers that may have at one point existed are now broken. Iago’s justice can never be justified, by taking or causing the bloodshed of the innocent for his own personal gain is no more justified then murder in cold blood. What ever promotion Iago is entitled to or what ever rights he may have is gone when he decides to create his own law. Nor should he posses the power to influence and decide the fate of others. â€Å"I hate the Moor;........Hell and night must bring this monstrous birth to the world’s light† (I.ii.20). Iago intend to â€Å"abuse Othello’s ear† and convince Othello his wife Desdemona is an adultress, â€Å"framed to make women false† (I.i.20). Iago plans to bring the devils evil to earth in order to get his revenge on Othello. Although Iago’s justice can never be justified his anger pointed towards Othello can be. Despite all the rage, fury, resentment, prejudice, and anger Iago feels towards Othello; Iago feels all this and more to the appointed lieutenant Michael Cassio. For Cassio has never had experience on the battle field, â€Å"A fellow almost damn’d in a fair wife; That never set a squadron in the field, Nor the division of a battle knows† (I.i.1). Iago also points out that â€Å"preferment goes by letter and affection† (I.i.2). Iago is well aware of the fact that he is more qualified for the position but choices are based upon brain and not achievements on the field. In Iago’s pursuit of destroying the Moor and achieving his rightful position he destroys so many lives. Michael Cassio is soon striped of his position due to Iago’s deceit. Othello’s fair wife Desdemona is murdered by her own husband after Othello’s mind is poisoned by th e â€Å"honest† Iago.

eBay Powerseller Essay -- essays research papers

The secrets of eBay Power Sellers! How to MAKE MONEY on eBay Use this valuable guide as a MONEY MAKING TOOL. Read it from start to finish over and over. The amount of information and wholesale sources you will find seems overwhelming at first, but don’t be intimidated. Take your time and be patient. It is going to take you several days to check out the sites because there are just so many items to choose from. This guide is updated for 2003 and the resources are used by eBay Power Sellers ALL the time. I have been selling on eBay for some time, almost 3 years now. Almost from the beginning, I wondered how Power Sellers obtain products so cheap that they can sell on eBay and STILL MAKE MONEY. Here are THE ANSWERS. Since eBay has millions of users, I don’t feel it’s going to hurt my business to share this easy to read guide. You’ll find it easy to follow and learn the tips & tricks to selling successfully on eBay along with the very best wholesale sources to get you started. REMEMBER! Read this guide over and over again. Check out all the sites and links. It’s amazing to find that you can buy products at incredibly low prices when you know where to get them at true wholesale. SELLING ON EBAY 1. WHAT TO SELL & HOW DO YOU WANT TO SELL IT: It does not have to be something that you enjoy selling, but it is easier to sell something that you would use yourself and that you believe in. I enjoy selling anything that does not earn me a one way ticket to the dark side in the afterlife, (lol), but will make me a profit in the present life. For starters you can purchase antiques, CDs, and just about anything you can imagine at true wholesale prices, and either list them on e-bay, your own website, take them to the flea-market, or your own retail store and make some real money with them. In fact, there many people around the country who have become a â€Å"Wholesale Supplier† themselves. What I mean by this is that they will get a few sample products, head to the flea market or local convenience stores, mark up their samples 10-15 %, and eureka, they are in business. At that point, all they need to do is keep their clients shelves stocked and count their cash!! I will tell you this a few times throughout this guide and remember it†¦Ã¢â‚¬ ¦Do Not Be Afraid To Talk To People. 2. TIMES TO LIST: Never list your items to end during the day, unless you end them on the weeke... ... you will find top-quality merchandise from your favorite name brand companies! You'll also find a great selection with new products added every day. The products are top quality, just like those in the nation's finest department stores, and they're backed by the warranties you expect. Once you get your feet wet, and want to make some international contacts, go to http://www.globalsources.com , and http://www.allproducts.com . Both of these sites will put you in touch with suppliers from all around the globe. Ok, now for the Free To Sell ebook bonus. Simply click on the link below & save it somewhere easy to find on your computer. It is a virus free download. Simply follow the instructions when you execute the saved file. All you need to do is download the main ebook with this link, then download any other titles you wish from within the main ebook!! It is great!! http://huas.net/dlbin/freetosell6.exe These guide & bonuses are fantastic!! They are going to be very helpful to you. We have never had any complaints on this guide and have had many customers thank us over and over for helping them get their online, or retail business started. BEST OF LUCK AND HAVE FUN!!

Feminism Essay

INTRODUCTION From the early days until now, women are exploited in their daily life especially by the labor market. In this paper, we are going to see how women are exploited in the labor market. Exploitation of women is a social fact in the world, so I chose this topic because it started to be a social problem after the Second World War period and Industrial Revolution. In the Second World War, most of our women faced many problems by participating and aiding the men. Actually, if we go back in time, we can see the gender-based division of labor typical of hunting and gathering societies. For example, most forms of farming were characterized by a distinction between ‘‘men’s work’’ and ‘‘women’s work.’’ In horticulture, the chief task for men was to clear the land. After this was done, women performed the more time-consuming tasks of planting, weeding, and harvesting. As with economies based on hunting and gathering, economies depe nd on horticulture were much more affiliated to the labor of women than the productive activities of men. Men, however, took on a larger role when horticulture gave way to agriculture. Also, in prehistory, women have always worked as hard as men to support their families and build the cultures that dominated the ancient world. During the early Stone Age, when humans first appeared and lived in hunting and gathering, most of scientists support that women did most of the gathering while men did most of the hunting. Women always took part up to now. Thus, women in the ancient world worked hard. They were always overwhelmingly responsible for care of children and their ill, for providing food, and clothing for the household. In addition, most women took on the duties of bringing in some income for family or working in the family  businesses. These facts remained constant. What did change over time was the degree to which women’s contribution was valued: As life became more urban, women’s contribution within the home was valued less than it was when life was more rural. It was with city life that labor outside the home which brought in money as a profit was valued more than labor within the home. This shift caused women’s work to be devalued. This devaluation began in the ancient world and continues into the present to the detriment of women without whose labors families and societies would not have survived. With the development of agriculture, societies grew larger and more complex. The increased population also permitted more specialization of labor, and women’s labor remained essential and varied. After the Agricultural Revolution, the technological and organizational changes that were the basis of some transformation have been labeled the Industrial Revolution which is first in Britain and then in many other parts of world. One of the conspicuous social changes was movement of women into paid employment in Industrial Revolution. This was not the same thing as an increase in number of ‘working women.’ Women have always worked hard up to now. The Industrial Revolution gave women new wage-earning opportunities, especially in the textile industry and the majority of the workforce was made up of young, unmarried women. Most of employers and factories benefited from women’s work, as their employment drove down the cost of labor. The Industrialization creates new opportunities for women in job creation especially in textile, clothing, and food industries. Also, during the industrial revolution, the emergence of factories opened many doors for women in the working world. It gave them opportunities for work outside of the home, mostly in factories. During the early years of the Industrial Revolution when a multitude of factories were emerging, between the years of 1780 and 1840, women are dominated by the labor forces. Even though these women were unskilled laborers, they worked quickly and productively yet were paid half or less than half of what men received. However, in the long run it did not change the female workforce. Although the Industrial Revolution provided independent wages, mobility and a better standard of living, for the majority, factory work in the early years of the nineteenth century resulted in a life of hardship. With the Industrialization, women’s life conditions started with many difficulties. They are suffered by lots of  stress and pain as a result of the conditions in which these women were working lon g hours, little food, crowded factories, overall unsuitable conditions. Most of women claimed that they have to study and bring home the bacon even they have a low-paid job. At this time, the early Industrialization did not invent large numbers of jobs for women. Despite it resumed to employ large numbers of women for the production of textiles and clothing, household-based manufacture persisted important aspects of the national economy. Moreover, with the development of mechanized textile industry and other industrial enterprises, many women continued to work with long hours and low wages. Finally, the most part of women worked long hours for low wages from ancient times to date. They have faced many difficulties in their daily life in both inside and outside the home; however, I will emphasize women’s work outside the home in the labor market. In the project, we will see exploitation of women in the labor market from Marxist-Feminist perspective with the examples. WHAT IS FEMINISM? Although there are many definitions of feminism and some disagreement concerning specific definition, there is agreement on two core principles underlying any concept of feminism. First, feminism concerns equality and justice for all women, and it seeks to eliminate systems of inequality and injustice in all aspects of women’s lives. Second, feminism is inclusive and affirming of women; it celebrates women’s achievements and struggles and works to provide a positive and affirming position toward women and womanhood. Feminism is a personal perspective as well as political theory and social movements. Feminism denotes to social theories, economic ideologies, political movements, and moral philosophies aimed at bringing equality to women. Also, it refers to complex set of political ideologies used by the movement in order to advance the cause of women’s equality, to end the sexist theory, and to practice of social oppression. Feminism has been classified in differen t groups and issues over the history. The first wave feminism gave rise to liberal feminists who make a struggle for the vote, access to education, and marry law reforms in the 1800s and 1900s. In the second wave feminism, we can see it with the emergence of radical feminists who protested for work and reproductive rights in the 1960s and 1970s. The third wave feminism associates with all forms of oppression (such  as racism, globalization) from 1990s to date. Also, the second wave of feminism spread across the United States during the 1960s and 1970s. By 1970, women’s liberation was in the news and a part of many women’s lives. For example, feminists protested women’s magazines at the Ladies’ Home Journal sit-in and the nationwide Women’s Strike for Equality featured creative protests from women in cities across the United States. In Turkey, it has started in the Ottoman Empire in order to have right to education, right to labor, right to respectability in family, etc. in the 1870s. After these events, women’s studies improved and increased by women in the world and it has come to these days. I think, although most of societies take action about like violence, oppression, discrimination, and trafficking of women, exploitation of women cannot take care in the world. For example, most of women protest some actions like violence against women, but when it comes to the exploitation of women in labor market, there is no action in the society. In this sense, feminism is not just sexism, discrimination, oppression, etc. Feminism is having the equal rights like men and avoid from sexism, discrimination. ORIGINS OF FEMINISM The existence of the term feminism or the movement it has come to represent. The term feminism comes from the French word ‘fà ©minisme’ and was popularized by Hubertine Auclert in 1882 when she organized the first women’s suffragist society in France. However, prior to the advent of the word, there were publications that fell within the purview of feminism. Some feminists suggested that women should build their own cities, free of men, so as to avoid men’s violence and oppression. In this sense, the history of feminism is the chronological narrative of the movements and ideologies aimed at defining, establishing, and defending equal political, economic, and social rights for women. While feminists around the world have differed in causes, goals, and intentions depending on time, culture, and country; however women’s right should be considered feminist movements, even though they did not apply the term to themselves. Also, as I mentioned before, feminism is a movement which is a collection of loosely connected groups and individuals committed to organized action, including changes in behavior and members of movements. Feminist ideas and social movements emerged in Europe,  Great Britain, and the United Sates in an international context that promoted the migration of people and ideas across national boundaries. At this time, Mary Wollstonecraft has published ‘Rights of Women’ (1792) and John Stuart Mill has broadcasted ‘The Subjection of Women’ (1869). Between these times, ideas, social movements, and individual feminists migrated across land and sea for generating a powerful new context for women’s rights. Therefore, these publications illuminate the process of this movement. Also, in Turkey At the end of the Ottoman Empire in the 19th century educated women began organizing themselves as feminists within the elites of Istanbul. These feminists fought to increase women’s access to education and to work low- paid, to abolish polygamy, etc. Early feminists printed woman magazines in different languages and established different organizations for women. Also during this time the Ottoman Welfare Organization of Women was first women association which was founded in Turkey in 1908. During the turn of the century accomplished writers and politicians such as Fatma Aliye Topuz (1862-1936), Nezihe Muhiddin (1889-1958) and Halide Edip AdÄ ±var (1884-1964) also joined the movement not only for advocating equality of Muslim women, but for women of all religions and ethnic backgrounds. ON THE HISTORY OF FEMINISM Feminism, in the most generic of definitions, is the theory of the political, economic, and social equality of the sexes, and organized activity on behalf of women’s rights and common interests. There are many feminists and many different theories. However, feminism can be broken up into three waves; first-wave which was seen from the nineteenth century to the early twentieth century, second-wave which lasted from the early 1960’s through the late 1980’s, and the third-wave which started in the early 1990’s, and it continues through present time. In this sense, feminist history is divided into three waves. A) First-wave Feminism The first-wave of feminism began in the United Kingdom and the United States around the nineteenth century and lasted until the early twentieth century. It focused on gaining the right of women’s suffrage, the right to be educated, better working conditions and sexual standards. The term, ‘first-wave’ was coined after the term second-wave feminism. The goal of  this wave was to open up opportunities for women, with a focus on suffrage. The wave formally began at the Seneca Falls Convention in 1848 when 300 men and women rallied to the cause of equality for women. Also, it emphasized mandated inequalities; but primarily gaining women’s suffrage. In this part, some feminists suppose inequality, patriarchy, lack ok distinction between men and women. For example, one of the earliest manifestations of first-wave feminism in Europe, Mary Wollstonecraft’s ‘A Vindication of the Rights of Woman’ (1792) which was written in the wake of the Frenc h Revolution and Simone de Beauvoir’s ‘The Second Sex’ (1949) are central to the canon as well, even though both authors were also laying the groundwork for radical second-wave feminism. Beauvoir introduced the notion of women’s radical otherness or, rather, the cognitive and social process of â€Å"othering† women as the second sex in patriarchal societies. Finally, first-wave feminism has been clarified as socialist/Marxist feminism in workers’ unions in the United States, in reformist social-democratic parties in Europe, and during the rise of communism in the Soviet Union. Liberal and socialist/Marxist feminism shared a basic belief in equity and equal opportunities for women and men, but the latter focused particularly on working-class women and their involvement in class struggle. B) Second-wave Feminism The term second-wave feminism refers mostly to the radical feminism of the women’s liberation movement of the late 1960s and early 1990s. The second wave focused on the link between societal and cultural inequality and political inequality. This wave unfolded in the context of the anti-war and civil rights movements and the growing self-consciousness of minority groups around the world. In this phase, sexuality and reproductive rights were dominant issues. second-wave feminism is a period of feminist activity. This phase began with protests against the Miss America pageant in Atlantic City between 1968 -1969 in terms of women’ s beauty dominated by patriarchy and low-paying jobs. For example, there was a worldwide movement called ‘Women’s Liberation Movement’ which was seen in Europe and Turkey. For example, most of women who work in clothing and textile factory staged a protest to these factories in terms of unhealthy working conditions, low-paid, poor sanitation, etc and it started with strike. When the police attacked to women, it broke out fire and many women died because of fire in Europe.  Finally, at this stage, women’s liberation grew out of the New Left and provided alliances with socialist/Marxist feminisms in areas such as the criticism of the dual workload for women working outside as well as inside the home, the demand of equal pay for equal work, a breakdown of the gendered division of the educational system and the labor market. C) Third-wave Feminism The third wave began in the 1990s as a response to the perceived failures of second wave feminism. It is a more holistic approach and it seeks to fight inequality that occurs as a result of age, race, sexual orientation, economic status and education as well as gender. Third wave feminism is also known as a variety of other names including girlie feminism, lipstick feminism, and etc. Also, it currently emphasizes the concepts of globalization, post colonialism, post-structuralism, and postmodernism. Third-wave feminism is tied up with the effects of globalization and the complex redistribution of power, which challenge feminist theory and politics. It also mirrors the diversification of women’s interests and perspectives and the breakdown of master stories of oppression and liberation. Finally, Third-wave feminism manifests itself in â€Å"grrl† rhetoric, which seeks to overcome the theoretical question of equity or difference and the political question of evolution or revolution, while it challenges the notion of â€Å"universal womanhood† diversity, and multiplicity in transversal in theory and politics. TYPES OF FEMINISM Feminism, like Marxism, takes a macro approach to studying society. They argue that there is inequality between genders. Feminist sociologists argue that, on account of their sex, women experience injustices in favor of men. For Feminists, it is living in a patriarchal society that leads to inequalities for women. This means that men have tended to determine the lives of women. However, there are striking differences between feminists in their values and perspectives. These differences can be divided into three broad tendencies like Liberal Feminism, Radical Feminism, and Marxist/Socialist Feminism. Also, there are other feminist ideologies aimed at defining, establishing, and defending equal political, economic, and social rights for women such as; ecofeminism, multiracial feminism, moderate  feminism, etc.; but, these three main types of feminism is the most important ideologies in feminism. 1) Liberal Feminism Liberal feminism is a form of feminism that argues that equality for women can be achieved through legal means and social reform. Liberal feminism leans towards an equality or sameness argument with men. It primarily focuses on women’s ability to show and maintain their equality through their actions and choices. Liberal feminists argue that our society holds are false belief that women are, by nature, less intellectually and physically capable than men, it tends to discriminate against women in the academy, the forum, and marketplace. Liberal feminists seek equal rights with men and believe individuals should be treated in accordance with their talents and effort etc. as opposed to characteristics of their sex. They campaign to remove any obstacle, be it political, social, legal or economical that gets in the way of women having the same opportunities as their male counterparts. Gender prejudice is based around individual ignorance. Education is seen as a valuable tool in the battle against discrimination based around ignorance. It is possible to legislate against sexual discrimination as a way of changing individual attitudes and behavior. For example, this action came up with the Sex Discrimination and Equal Pay Acts in the 1970s in Britain. Liberal feminists also tend to support marriage as an equal partnership, and more male involvement in child care. Abortion and other reproductive rights have to do with control of one’s life choices and autonomy. Liberal feminism conceives of politics in individualistic terms and looks to reform present practices in society, rather than advocating for a wholesale revolutionary change. Feminist writers associated with this tradition include early feminist Mary Wollstonecraft and second-wave feminist Betty Friedan. 2) Radical Feminism Radical feminists believe that the main rival of women is patriarchy, which guarantees male supremacy and the subordination of women at work and in the home. Patriarchy has existed in all known human societies and, as such, pre-dates capitalist forms of gender inequality. Patriarchal relationships are considered to have paved the way for capitalist forms of economic and  gender exploitation. In their view, men inflict physical and sexual violence over women and commandeer the majority of material rewards. They believe that men are able to justify their actions by persuading people. It is natural that men should be the dominant sex. For radical feminists, sexual inequality is institutionalized in society. It is not possible to achieve sexual equality through legal means or by â€Å"changing people’s attitudes†. Radical feminism advocates lesbian relationships to free themselves from men. They argue that new technology eliminates dependency on men as a means of conceivi ng. This group views the oppression of women as the most fundamental form of oppression, one that cuts across boundaries of race, culture, and economic class. This is a movement intent on social change, change of rather revolutionary proportions. Some radical feminists argue that female emancipation can be achieved technologically like women being freed from childbirth. In general, radical feminists see the exploitation of women as involving both the public sphere like work and the private sphere like in the home. Finally, radical feminism locates the root cause of women’s oppression in patriarchal gender relations. In this sense, radical feminists believe that gender inequality is a result of the collective efforts of men to dominate, control, and exploit women. 3) Marxist/Socialist Feminism Marxist/Socialist Feminists believe social class affects the life chances of women; it is a key factor in the relationship between men and women. They believe capitalism has led to amplification of conflicts between the sexes and that introducing communism would solve this. Under capitalism women are a ‘reserve army of labor’ who are excluded from crafts and exploited for free labor in the home. They believe men are socialized into exploitative roles. The phrase â€Å"socialist feminism† was increasingly used during the 1970s to describe a mixed theoretical and practical approach to achieving women’s equality. Socialist feminist theory analyzed the connection between the oppression of women and other oppression in society, such as racism and economic injustice. Socialists had fought for decades to create a more equal society that did not exploit the poor and powerless in the ways capitalism did. Like Marxism, socialist feminism recognized the oppressive str ucture of capitalist society. Like radical feminism, socialist  feminism recognized the fundamental oppression of women in patriarchal society. However, socialist feminists did not recognize gender and only gender as the exclusive basis of all oppression. For Marxist feminists, the concept of social class is considered to be more important than the concept of patriarchy since the latter is seen as a form of ideology that stems from class exploitation. Women are not a sex class because the only thing they have in common is their sex as an upper class woman. Women’s work and their social status are highly marginalized by their potential / actual â€Å"dual role† in modern societies (baby sitter and worker). Employers are able to exploit this dual role to pay women lower wages. Men are able to exploit this dual role by receiving â€Å"unpaid services† within the home. The main reason for women’s lower status in relation to men is the fact that they are generally economically dependent upon their male partner. MARXIST FEMINIST THEORY AND EXPLOITATION OF WOMEN IN LABOR MARKET To begin with, most of women are exploited by both work inside and outside the home and this condition is not recent origin. It started with hunting and gathering societies, but they have been very active in the labor market since the Second World War period. Women are exploited by discriminating, oppressing, working, etc. and their live always face with difficulties by these causes. However, if we analyze the background of exploitation of women, it partially comes from inequality because in the contemporary world, inequality is manifest in the economic and social class which affects women more than men in the world. It still continues to increase in every part of the world because of the capitalism. In this sense, Marxist feminism emphasizes the social institutions of private property and capitalism to explain and criticize gender inequality and oppression. Private property gives rise to economic inequality, dependence, political, and is the root of women’s oppression in the social context. Capitalism still alive in the society and with growth of the capitalism, exploitation of women increases continuously. Capitalism gave to women in an insignificant way. Marxist feminists view the capitalist drive for profits as responsible for women’s second-class status and other forms of oppression such as racism or discrimination. Moreover, Marxist feminism believes that women are an exploited class in the capitalist mode of production, both by their   within families and by employers in the paid labor market and the theory indicates that men are in bourgeoisie and women are in the proletariat. Marx showed that how the working class is exploited for profit by capitalists who gain wealth by paying workers a bare minimum of the value that they produce. Marxism and feminism complement one another in many ways, as both are centrally concerned with oppression and inequality. Marxist theory states that people are oppressed by the ruling class and that production, namely capitalism, is the ruling force of society. According to feminist theory, women are oppressed by a male-driven society. Marxist feminism, the intersection of the two philosophi es, calls for the dismantling of capitalism to free the proletariat and promote gender equality. Karl Marx critiqued the capitalist power structure that oppressed the proletariat, and which also oppresses women. Marxism and feminism complement one another in many ways, as both are centrally concerned with oppression and inequality. Marxist theory states that people are oppressed by the ruling class and that production, namely capitalism, is the ruling force of society. According to feminist theory, women are oppressed by a male-driven society. Marxist feminism, the intersection of the two philosophies, calls for the dismantling of capitalism to free the proletariat and promote gender equality. Also, scholars influenced by Karl Marx have seen capitalism as an inherently exploitative system one in which capitalist workers, whose low wages do not fairly compensate them for the work that they perform. Others have taken opposite position, arguing that capitalist industrialization, although uneven in its consequences, brought about a rise in incomes and living standards for the bulk o f the working population. Furthermore, women have been always worked in the labor market, factories, marketplace, etc. They are partially seen in subordination status. The main reason for women’s lower status is relation to men is the fact that they are economically dependent upon their male partner. Sometimes women have to dependent on their male partner because men always work in a factory and marketplace and most of men seem like ‘breadwinner’. In this sense, patriarchy is an ideology that comes from male attempts to justify the economic exploitation of women and patriarchal forms of exploitation have existed in all known societies, not just capitalist ones. In addition, they argue that patriarchy predates capitalism which makes it more  significant explanation of female exploitation. In some Mexican and Central American plants, women expose to pressure in order to not to become pregnant so that companies do not have to pay maternity leave. This exploitation is in form of ‘sweatshop’ like working conditions. They give unproportional wage compared to male workers. Today, it still continues like that. For example, in Nike companies, women face to some difficulties such as low wages, poor sanitation, no break, unhealthy environment, no security. Women are mostly seen like slave and victim in every sector of market. They do not say anything because most of women want to be independent individual and make money for their family. Also, textile and food industries are mostly preferred by women even the working conditions are not convenient. According to Marx, society is broken up into two classes containing those who own the means of production (factories, tools, capital) and the laborers who are exploited to produce the items demanded by the ruling class. Marxist feminists are primarily concerned with the division of labor that keeps women in the domestic sphere and men in the workplace. In addition to this, when women enter the workforce, they are delegated to jobs that are deemed appropriate for their gender and are usually underpaid for their work. Working-class women are clearly the most oppressed, super-exploited sector of the entire proletariat. Also, Engels said that ‘‘†¦These measures are not aimed at driving all women permanently out of the work force. Rather, they make women more vulnerable to increased exploitation, by driving down their place in the work force (lower wages, fewer hours, less job security, fewer holidays, and more piece work, less safety and less unionization). Thus this attack is focused on a sector of the work force whose place in the work force has traditionally been seen as marginal, but its overall effect is to exert a downward pressure on the wages and conditions of all workers’’( Engels, 2004:8). CONCLUSION As a conclusion, women are generally underpaid compared to men in every part of sector and working conditions; but not just labor market. Also, they expose to discrimination, pressure, sexual harassment, exploitation inside the home. They are exploited more by capitalism than male workers in the labor market. In this sense, Marxist feminist theory attempts to explain the  structure of modern industrial society with special emphasis on class and labor and women workers are exploited at a higher level than male, with women of color suffering the highest degree of exploitation because of gender and race discrimination. In my point of view, exploitation of women is a social fact in our society, not only in labor market but also in other aspects of their daily life like at home. Ä ±n the contemporary world, inequality is manifest in all sectors, most of companies, factories applied to pressure to the women like pregnancy, low wages, no security. Although, Industrial Revolution gave new opportunities in terms of jobs, exploitation of women continued to expand in the world. Today, thanks to the institutions, women are more outgoing in the society, even the exploitation of women still grows up. As a final point, exploitation of women is seen like a normal action in the society, at least others are not like that. In this sense, women are not classified by their race, gender, inequality, etc. References 1. Salisbury, J. E. (2001) ‘‘Encyclopedia of Women In The Ancient World’’ 2. Volti, R. (2008) ‘‘An Introduction to the Sociology of Work and Occupation’’ 3. Binder, C. & Richmann N. (2000) ‘‘Feminist Movements in Turkey’’ 4. Vinteuil, F. (2010 September 27) ‘‘Marxism and Feminism from Critique Communiste’’ from http://www.internationalviewpoint.org 5. Shaw, S. M. & Lee, J. (2012) ‘‘ Women’s Voices, Feminist Visions: classic and contemporary readings ’’(5. Edition) 6. â€Å"Working Women in the 1930s.† American Decades. 2001. Retrieved January 09, 2014 from Encyclopedia.com :http://www.encyclopedia.com/doc/1G2-3468301237.html 7. Brewer, P. (2004) ‘‘Frederick Engels: The Origin of The Family, Private Property, and the State’’ from http://readingfromtheleft.com/PDF/EngelsOrigin.pdf 8. Kabeer, N. (2012) ‘‘ Wo men’s economic empowerment and inclusive growth: labor markets and enterprise development ’’ 9. Knaus, K. (2007) ‘‘ Turkish Women: A Century Of Change ’’ 10. Iternational Labor Office, Geneva (2010) ‘‘ Women in Labor Markets: Measuring progress and identifying challenges ’’ 11. Freedman, J. (2001) ‘‘ Feminism’’ Open University Press 12. www.sociology.org.uk 13. www.dosomething.org/background-sweatshops